Wipe off any dust or dirt from the wooden shadow boxes before starting this project. Then paint the inside of the shadow boxes using the white matte. Allow for the paint to fully dry. Then paint the edges and back of the shadow boxes black matte. Let dry.
Download the png files from DIYandFUN.com . Using the png files upload them to cricut. Make them 4x4 to fit these shadow boxes.If you have a different sized box you will need to change the size. Place the black matte oracal on the blue cutting mat. Tell the machine to cut on vinyl setting. Weed designs with the weeding tool as needed. Once the design is weeded then cut a piece of transfer tape the same size as the design square. Place the transfer tape over the top and scrape with scraper tool.
Peel back slowly making sure that the design sticks to the transfer tape. Now place the design to the wood square on the inside. Press down and then scrape with scraper tool. Peel back slowly making sure the design sticks to the box.Repeat this for the other box and design as well.
Notes
Please visit DIYandFUN.com for details on this project and others.